CORROSION PROTECTION PRODUCTS
Ideal for protecting Marine Decking, Cargo Tanks, Chemical
Tanks, Ballast Tanks. |
|
Thistlebond provide many
coatings that can protect and enhance company assets whether
it be the factory floor, mechanical plant and equipment
or marine decking and plant equipment. |
 |
The THISTLEBOND
range of polymers offer DURABLE HIGH PERFORMANCE protection
to a wide range of substrates, which will suffer attack from
these and many other sources.
When the surface has been PROTECTED using THISTLEBOND
POLYMER PRODUCTS, it will also last MUCH LONGER,
increasing the maintenance free period and subsequently reduce
the cost of plant shutdown due to down time. |
|
Corrosion can
be classified into the following main categories:
- Abrasion
- Corrosion
- Chemicals
- Traffic
- Cavitaion
- Weather
- UV Rays
- Graffiti
The products in this section of the web site address these
activities. |
| Product
Code |
Product |
Description |
Pack
Size |
Coverage |
Download
Data Sheet |
|
Ultimate Chemical Protection. Chemi Tech UC |
High performance solvent free coating with outstanding
adhesion to steel and concrete even under total immersion
conditions. Designed for use where exceptional resistance
to chemical attack is required. |
5 kilo |
14m²/unit at 300 microns |
|
|
Corrosion and Chemical Protection. Chemi Tech CR |
High performance solvent free coating with excellent
corrosion and chemical protection. Ideal for protecting
steel and concrete in aggressive environments. |
5 litre |
20m²/unit at 250 microns |
|
|
Ballast Tank Coating. 152 SFE -Chemi Tech 152/LV |
Two component solvent free high build system suitable
for application to manually cleaned steel in adverse
conditions. Approved by Lloyds for ballast tank coating. |
2.5 litre |
10m²/unit at 250 microns |
|
|
High Build Coating. 152 SFE AS - Chemi Tech 152/LV
- AS |
Two component solvent free high build system suitable
for application to manually cleaned steel in adverse
conditions. |
20 litre |
80m²/unit at 500 microns |
|
|
Lloyds Approved. Therma-Tech LG |
Lloyds approved water based single component coating
for the protection of all types lagging. Provides flexible
weather and waterproofing protection with outstanding
durability. |
20 litre |
55m²/unit at 200 microns |
|
|
Anti-Corrosion Aluminium |
High solids anti-corrosive coating ideal for marine
decks, stairs and railings. |
2.5 litre |
17.5m²/unit at 125 microns |
|
|
Spray Primer. MA9 Tie Coat |
Spray applied prefabrication primer. Ideal for steel
and GRP. Overcoating period up to six months. |
5 litre |
44m²/unit at 50 microns |
|
|
Copon EA5 |
High performance higher build chemical resistant protective
coating |
5 litre |
5.4m²/Ltr |
|
|
Hydraseal SPRAY. Copon Hydraseal |
Water Borne Single Component Anticorrisve Coating |
5 litre |
5m²/litre |
|
|
Hydraseal BRUSH. Copon Hydraseal |
Water Borne Single Component Anticorrisve Coating |
5 litre |
5m²/litre |
|
|
Copon PUWB |
Water Borne Polyurethane Coating |
5 litre |
17.2m²/litre |
|
NOTE: the published figures are to be used as general guide
lines only as each application will vary in surface finish,
temperature and surrounding air temperature DOES impact
upon published figures.
For applications where extreme temperature, thermal cycling,
vibration or high acid concentration are present or where
nothing will work for you - then please visit Fluorolast
Coatings (opens in a new window)
|
| |
|
