MIXING THE PRODUCT |
|
Always check the labels on the containers
to verify BASE:SOLIDIFER volume ratios.
If PART using BASE:SOLIDIFER - ENSURE that the mixing implements
(Spatula) do NOT come into contact with EACH other in the
product containers as this will cause a reaction and make
the reaming product un-usable.
Double mixing - after initial mixing on either mixing board
or container - move mixed product to new board / area on
board and re mix with clean mixing implements. If being
mixed in a container, pour into new container and re mix
with new mixing implements. This ensure that ALL product
is mixed and that there is no UNMIXED material left on either
the mixing medium or mixing implements.
A common source of error: Un-mixed material
left on container wall / bottom. Un-mixed material on the
blade of mixing implement.
When mixing the PASTE type products, then when asked for
a ratio of say 3:1, eyeball assessment is satisfactory.
Solidifier is always a ratio of :1.
|
|
|
RATIO OF 1 : 1 |
RATIO OF 3 : 1
|
|
Mixing with a spatula |
|
|
|